iVAC Magnetic NVR Switch for Automated Dust Control

The iVAC Magnetic NVR Switch for Automated Dust Control

The iVAC MSC (Magnetic Switch Controller) has been specifically designed to work with NVR (No Volt Release) switches that are typically standard on home workshop dust extractors and are required in larger commercial or teaching workshops in Australia.

Most single-phase dust extractors have mechanical (KJD12-style) switches rather than fully magnetic NVR switches, however, the MSC Pro works by controlling a fully-magnetic NVR switch. The existing NVR switch in the dust extractors is bypassed and replaced in the circuit with the magnetic NVR switch supplied. This still provides you with full NVR switch protection and allows the MSC Pro to operate.

Most three-phase dust extractors already have a magnetic NVR switch controlling the power to the unit and therefore the MSC Pro can be purchased separately and wired into the existing magnetic NVR Switch. The MSC Pro then controls the power flow within the NVR switch to operate the dust extractor. In the event of system power loss, the NVR switch and MSC Pro will need to be reset, which means you still have the full safety of an NVR switch built into the system.

Having Trouble with designing your iVAC solution?

We at Timbecon pride ourselves with the high level of customer service. Should you need any help with iVac products. Please contact us and let us assist.