iGaging EZCal Digital Vernier Calipers 150mm with Depth Base Attachment Metric & Imperial Scales

Not all Verniers are created equal

In fact, the iGaging EZCal Digital Vernier Calipers are almost without equal in quality. Accurate to 0.038mm with a repeatability 0.0127mm and reading accuracy of 0.01mm on both inside and outside measures. Most Verniers are only accurate on outside measures so be sure to check this before buying another set.

The super large LCD display is easy to read and can measure in Metric or Imperial (with decimal and fractional 1/128^th graduations) with a quick measuring speed of 120in per second. EZCal Verniers are IP54-splash water, oil and dust resistant and individually serialised. They are produced from hardened stainless steel with a precision lapped, smooth finish.

All iGaging EZCal verniers are checked and serialised prior to leaving the factory so you can be sure that you are getting an accurate piece of hardware you can rely on for many years to come. Supplied with two CR2032 batteries straight out of the box too so you don't need to worry about replacements for a long time.

Depth Base Attachment

The iGaging Depth Measuring Base allows the conversion of your Vernier Calipers into a stable depth gauge. It saddles the bottom end of standard Vernier Calipers arms and is secured in place with a small stainless thumbscrew locking the base to the Calipers to aid depth measurement. When used with an iGaging Vernier Caliper you can get fantastic digital accuracy.

• Made of stainless steel, high precision ground and hardened
• Easily attached with screw knob. No modification to the Calipers required
• Accommodates arms up to 16mm (5/8in) wide
• Total span 74.5mm