Sherwood DC-50 with iVac Switchbox Automated Dust Collection Bundle

A Sherwood DC-50 plugged into an iVac Switchbox makes a dust-killing combination! Reduce dust nuisance, protect your health and boost your productivity with this convenient and economical bundle.

How Does it Work?

Simply connect the dust port of your machine to the DC-50, plug the power cords of both the DC-50 and the machine into the iVac Switchbox, and that's it! The iVac switchbox automatically activates the DC-50 at the instant you start your machine, and turns it off afterwards. No more forgetting to switch on your extractor and covering yourself in dust. And no more wasting electricity by running your extractor for ages after the machining job is finished.

The Sherwood DC-50

The DC-50 has a powerful 1100W brushed motor that operates a High Pressure Low Volume (HPLV) extraction system. Its flow rate is approximately 53L/second making it suitable for extracting off all small woodworking machines such as router tables, table saws, benchtop thicknessers etc. It comes standard with 2m of 4in dust hose to be located close to the machine for maximum efficiency. The twin filtration system will filter fine dust down to 0.5micron and has a steel 50L collection drum that is easily emptied via single-action quick release barrel clamp when getting full.

The iVac Switchbox

The iVAC Switch Box is an automated dust extraction switch that activates your shop vacuum automatically whenever the power tool to which it's attached is turned on. Because the iVAC Switch Box powers up immediately, it helps to clear out any debris that may be stuck in the power tool and that can become a dangerous projectile. The iVAC Switch Box automatically turns the shop vacuum on before you actually begin to cut materials, and will continue to draw debris while the power tool is running and for approximately 6 seconds after you turn it off.

Both components are available separately. For more information on each of them, click below:

DC-50

iVac Switchbox