Free shipping on eligible orders over $149*

Torquata  |  SKU: SPD-02

Torquata Shelf Pin Drill Jig System with 5mm & 1/4in Drill Bits

$59.90
Melbourne: 10+, Perth: 2

Sale ends in:

00 : 00 : 00 : 00
Days
Hours
Mins
Secs

Request Further Information

Torquata Shelf Pin Drill Jig System with 5mm & 1/4in Drill Bits

Eligible for FREE Shipping*

A quick, easy and affordable DIY template for drilling shelving pin holes

When we were tossing up between the Kreg and Torquata Shelf Drilling Jigs we brought both in and did a wip-round our workshop to see what our own woodworkers preferred. Surprisingly, the Torquata came out on top despite the lower cost, because the jig is built with a flat design that makes it easier to use in tight spaces and on tricky angles.

Overall, it's a very well designed jig, which can allow even the laymans among us to drill shelf pin patterns accurately every time.

Clear body, strong fence

The 3mm-thick clear perspex body makes it easy to see your work, simply the slide the strong steel tube fence up against the edge of your carcass for easy registration, and use the included two retractable shelf pin drill bits to drill either 5mm or 1/4in shelf pin holes on the industry-standard 32mm hole centres.

The 5mm Adjustable Drilling Jig will allow you to drill up to 11 holes at once either 37 or 63mm from the front or back of the carcass and the fence can be swapped to work on both sides of the carcass.

Features

  • The dependable shelf pin drill bit has a 1/4in hex shank for quick-change chucks
  • It's designed specifically for hard-wearing use and professional capacity - it's for drilling hundreds of holes in all materials.
  • It automatically centres the high-quality M2 HSS brad point bit perfectly in the centre of each hole
  • It will create a row of shelf support holes perfectly in line on your work piece.
  • The drilling depth is adjustable via the grub screw located on the body the bit. 
  • With locating pin holes machined on either end, you can continue to drill a series of holes past the 11 built into the jig body.

We've found the shelf pin bits to be very reliable and we're selling these Jigs with two self-centring drill bits as standard - the 5mm & 1/4in. These are also available separately to be purchased as spare parts if required.

Torquata

Torquata Shelf Pin Drill Jig System with 5mm & 1/4in Drill Bits

$59.90

A quick, easy and affordable DIY template for drilling shelving pin holes

When we were tossing up between the Kreg and Torquata Shelf Drilling Jigs we brought both in and did a wip-round our workshop to see what our own woodworkers preferred. Surprisingly, the Torquata came out on top despite the lower cost, because the jig is built with a flat design that makes it easier to use in tight spaces and on tricky angles.

Overall, it's a very well designed jig, which can allow even the laymans among us to drill shelf pin patterns accurately every time.

Clear body, strong fence

The 3mm-thick clear perspex body makes it easy to see your work, simply the slide the strong steel tube fence up against the edge of your carcass for easy registration, and use the included two retractable shelf pin drill bits to drill either 5mm or 1/4in shelf pin holes on the industry-standard 32mm hole centres.

The 5mm Adjustable Drilling Jig will allow you to drill up to 11 holes at once either 37 or 63mm from the front or back of the carcass and the fence can be swapped to work on both sides of the carcass.

Features

We've found the shelf pin bits to be very reliable and we're selling these Jigs with two self-centring drill bits as standard - the 5mm & 1/4in. These are also available separately to be purchased as spare parts if required.

View product