Milescraft DrillPump

The DrillPump750™ is designed to work with most electrical drills with a maximum speed of 2,800 RPM. This water transfer pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4” and uses any standard garden hose. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. The 3/8” shank on this unit fits all common chucks for most drills.

DrillPump750 Features:

• Pumps up to 750 (3000 litres) gallons per hour
• Self-priming up to 12 feet
• 3/8” shank on this unit fits all common chucks
• 3/4″ hose connection, for use with a standard garden hose

Tips & Tricks:

• The power drill may only be operated in clockwise rotation, never run DrillPump in reverse
• DrillPump will not turn by hand, this must be chucked to the drill.
• DrillPump must be mounted for proper usage, do not hold in hand.
• After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
• Do not get the drill wet, or use the drill pump with flammable liquids.
• The direction of flow is indicated by an arrow on the housing.
• The delivery rate can be regulated by the speed of the power drill.