Torquata Power Tool Guide Rail with Quick Clamp

The Torquata Power Tool Guide (PTG) with Quick Clamp is the heart of a versatile power tool guide and clamping system. This PTG Quick Clamp is versatile, easy to use and super quick to setup. If you are a power tool fanatic who wants to saw, rout or clamp - then the PTG Quick Clamp is for you.

Please select your preferred length option.

Sawing or routing straight lines using a straight edge is not hard. Yet having to reset and clamp the edge in position every time you make a new cut can be time consuming. It can also be the source of inaccuracies and errors. Forget that. You need a purpose made guide that is versatile, easy to use and quick to set up. Welcome the PTG with Quick Clamp from Torquata.

No longer must you spend a fortune on some saw guide system from Germany. The Torquata PTG Quick Clamp is an economical product, 100% made in Taiwan that will provide you with years of accurate performance. In addition, the Torquata PTG is a versatile product that may also be adapted for work holding, jig making and setting out purposes.

The Torquata Power Tool Guide with Quick Clamp

This PTG with Quick Clamp are a purpose made straight edge power tool and clamping guide. The guide is made from rigid extruded aluminium and features twin T-slots along its length. Available in two different lengths, the PTG Quick Clamp guarantees you a straight cut every time. This guide has a broad number of applications limited only by your imagination.

Guide your power tool

The PTG Quick Clamp offers a versatile and secure method for accurately guiding circular saws, routers, jigsaws or anything else you can fix the PTG Traveller PTGPTT accessory sold separately. The Power Tool Traveller will accept virtually any relevant power tool and connects simply and snuggly to the guide.

Clamp your project

Attach any two PTG Quick Clamps together using the Power Tool Guide Side-To-Side Connector Kit PTGS-2-S, or the Back-to-Back Connector Kit PTGB-2-B. Do this to create your own wide body or back-to-back clamp. Secure the bottom clamp to the bench and secure your piece with the top clamp - you are now ready to work. Sanding, gluing and routing are now much easier. Other accessories available, check out the broader range on the complete system tab.

Use as an accessory fence

Designed primarily to work in the twin T-slots of the guide, use the Power Tool Guide Hardware Kit PTGHWK to build your own custom jigs and fixtures. Attached stop blocks, feather boards or anything else that comes to mind.

Set out your work

Another accessory for the PTG Saw Guide is the PTG 90 Degree Head PTG-90-D. The 90-degree head fixes easily around the Quick Clamp's fixed clamp head and turns your PTG Quick Clamp into a T-square. The 90-degree head greatly reduces the time taken to set up a square crosscut and turns the guide clamp into a large square for marking out.

100% made in Taiwan

The Torquata Power Tool Guide with Quick Clamp is a quality yet economical product 100% made in Taiwan.

Easy and quick

Whatever your application is for the Torquata PTG with Quick Clamp, using this tool is always easy and quick. Simply slide the guide into position and depress the hand lever to fix. This power tool guide will save you time and money.

Secure double end fix

The PTG Quick Clamp fixes very securely in position. The secret is the steel rod that runs along the length of the guide that links the foot and head holding pads together. The foot pad slides easily into position when adjusting to width. And when you depress the locking handle to fix, the steel rod draws the foot pad in locking the guide in position. Locking the guide at both ends ensures a secure fix. There is no chance the guide will slip - your work will always be accurate and safe.

Versatile

The PTG Quick Clamp has a broad range of purpose made accessories. Use as a saw guide, jig fence or clamping tool. Forget single purpose saw guides. The PTG Quick Clamp is a versatile, universal system allowing you to solve a wide range of sawing and clamping challenges.

Twin T-slots and measuring tape

The PTG Quick Clamp features two T-slots along its length. Use these to attach a range of accessories and broaden the application of your guide. Along the guides spine is a metric / imperial measuring tape. Use this to position stops, estimate cuts and set out your work all without reaching for your tape measure.

The hand lock

The hard plastic hand lock features three progressive clamping pressures. Like a high-quality table saw fence, this feature allows you to apply slight pressure and bump the guide into position before you finally lock it off. Accuracy is king!

Rigid construction

The PTG Quick Clamp is a rigid extruded aluminium extrusion. This means this saw guide doesn't flex, even under load when locked in position. Rest easy as you saw perfectly straight cuts with no flex. Enjoy no deflection when you join clamps back-to-back to make a sanding jig. Cancel vibration when used as a feather board guide. You can rely on the PTG Quick Clamp.

Purpose made, obstruction free

The guide is purpose made. This means that it works. Attach your saw and work without obstruction. Reposition to make another cut easily, accurately and without obstruction. Let the PTG Quick Clamp do the work.

The Torquata Power Guide offers you as complete system. Check out this range of options for you to create the most versatile of workshop assistants

Power Tool Guide Traveller - PTGPTT

Cut smooth, straight, clean lines with the PTG Traveller base plate fixed to your circular saw or router. The Traveller then attaches directly to your PTG Quick Clamp. You can leave the Traveller attached to your power tool for free hand cutting.

Power Tool Guide Handle Extender - PTGHE

The 180mm long handle extender fits to the Quick Clamp fixing handle. This extension gives you better leverage to operate the clamp when more clamping pressure is required.

Power Tool Guide 90 Degree Head - PTG-90-D

Turn your PTG Quick Clamp into a T-square. The 90 Degree head fixes around the Quick Clamp's fixed clamp head. Attaching the 90 Degree head greatly reduces the time taken to set up a square crosscut and turns the guide clamp into a large square for marking out.

Power Tool Guide Wide Jaw Kit - PTGWJK

More clamping surface area means clamping stability and power. Great for wide or thick stock, reduces marring on soft materials. The wide jaws fit securely to the Quick Clamp head fixed by two wood screws that are included in the kit.

Power Tool Guide Back-To-Back Connector Kit - PTGB-2-B

These adaptors join two PTG Quick Clamps back-to-back. This creates a holding device to grip panels of sheet material across the top of your bench. The lower clamp grips your bench, while the upper clamp holds the workpiece. Adaptors supplied as a pack of 8.

Power Tool Guide Side-To-Side Connector Kit - PTGS-2-S

Attach any two PTG Quick Clamps to create your own wide body back-to-back clamp. Secure the bottom clamp to the bench, secure your piece with the top clamp and you are ready to work. Sanding, gluing and routing are made much easier.

Power Tool Guide Hardware Kit - PTGHWK

Use this hardware kit to build your own custom jigs and fixtures for your PTG Quick Grip clamp. Designed primarily to work in the T-slot of the clamp.